Ducati Hypermotard Crash Protection: CNC Racing Range by Generation

by Euro Motards

The Ducati Hypermotard occupies a unique space in motorcycling — a supermoto-style bike with genuine performance and an upright, aggressive riding position. Crash protection needs matter regardless of whether you ride it on the road, at track days, or occasionally down a green lane.

Hypermotard Generations — An Honest Fitment Breakdown

  • Hypermotard 821 / Hyperstrada 821 (2013–2015): By far the best-covered generation in our CNC Racing catalogue — see below.
  • Hypermotard 939 (2016–2018): Covered by several shared-fitment items alongside the 821.
  • Hypermotard 950 (2019+): The current twin-cylinder model. We do not have broad CNC Racing fitment confirmed for the 950 specifically — contact us with your exact year before ordering.
  • Hypermotard 698 Mono (2024+): A new single-cylinder platform with a different chassis and engine layout entirely. Crash protection for the 821/939/950 twins will not fit the 698 Mono, and we do not currently have 698-specific CNC Racing products confirmed in stock. This is a newer platform and aftermarket coverage is still developing across the industry — check with us before assuming any part fits.

What CNC Racing Actually Stocks (821/939 Generation)

Axle Sliders

Front and rear wheel axle sliders covering Hypermotard/Hyperstrada 821, around £80 each — genuine billet protection at the wheel ends, the most direct defence against ground contact in a slide.

Crankcase Protector

A crankcase protector covering Hypermotard/Hyperstrada 821/SP, around £40, protecting one of the most expensive components to replace.

Fluid Caps

Clutch fluid cap (4 colours) and front brake cap (covering Hypermotard 821/939 and Monster 620/Scrambler), both around £45–£50 — small upgrades that also protect vulnerable reservoir housings.

Triple Clamps and Steering Head Ring Nut

A billet triple clamp kit covering Hypermotard/Hyperstrada 821/939/SP is available for track-focused riders (four-figure price), and a steering head ring nut covers 821/939/950 architecture — the one item in our range with confirmed 950 fitment.

Frame Caps and Side Stand

A 6-piece frame cap set and a side stand enlarger plate (useful for parking on soft ground) round out the range.

Use Case: Road, Track, and Green Lanes

For road riders, axle sliders and the crankcase protector are the priority — they address the most common low-speed drop scenarios. For track day use, add the triple clamp if you're tuning geometry, plus fluid cap protection. For green lane use, the crankcase protector matters most since off-road tip-overs land on uneven ground rather than sliding along tarmac.

Realistic Expectations

No crash protection product makes a motorcycle crash-proof. Axle sliders and crankcase protectors reduce damage in low-speed incidents — they don't prevent damage in a high-speed track crash, but they turn a car park tip-over into a much smaller repair bill.

Shop Hypermotard Crash Protection at Euro Motards

We stock genuine CNC Racing protection for the Ducati Hypermotard 821/939 range with verified fitment. Browse our full crash protection range or filter by Ducati crash protection, or email us to confirm fitment for the 950 or 698 Mono.

Back to News